Netvio 24-Port 1Gb 1U Plug & Play AVoIP Network Switch - Zero Configuration
Netvio

Netvio 24-Port 1Gb 1U Plug & Play AVoIP Network Switch - Zero Configuration

Stock Code: NV-1020
In Stock
£570.00 (exc VAT) per Each
£684.00 (inc VAT)
Quantity: - +

Product Description

24-Port 1GB 1U Plug & Play AVoIP Network Switch with zero configuration


The Netvio IP-SW-24P-10 is a dedicated plug 'n' play AVoIP Switch designed for use with Netvio and other AV over IP solutions. It comes preconfigured for multicast AVoIP solutions, requiring zero configuration for systems with up to 21 encoders and/or decoders. The Netvio IP-SW-24P-10 is a dedicated plug 'n' play AVoIP Switch designed for use with Netvio and other AV over IP solutions. It comes preconfigured for multicast AVoIP solutions, requiring zero configuration for systems with up to 21 encoders and/or decoders.

All ports support POE with a total 450W PoE budget, which is large enough to power devices connected to all ports simultaneously.

There is an additional Gigabit copper and dual SFP fibre module ports for local area connection, enabling the distribution of JP4 series preview streams without complicated VLAN configuration.

The Netvio IP-SW-24P-10 is designed and suitable for systems with 21 or less AVoIP end points only. Multiple IP-SW-24P-10 switches cannot be used in the same system unless they are completely isolated systems. It is only designed to connect to AVoIP encoders and decoders.

Please Note: Due to its configuration, it is not recommended that other AV or IT equipment is connected to this switch.

This switch's power input supports input voltages of 100 to 240VAC, 50/60Hz.

The power LED lights up when the switch is connected to a power source and the rear switch is powered on. The link indicator light indicates the network connection through the corresponding port. Flicker indicates that the switch is sending or receiving data PoE indicator: The 'On' indicates that a device is connected to the corresponding port and drawing power and the 'Off' indicates that the port is not powered or no device is found.

For grounding, please use specialised ground lead connected to the ground.

  • Zero configuration
  • Plug 'n' play for Netvio IP video and control solutions
  • 24 Gigabit ports with PoE
  • Connectivity for Netvio IP-JP4-CL-10 and up to 21 TX, RX end points
  • Large 450W PoE budget to power every connected device
  • Additional Gigabit copper and SFP fibre module ports for local area connection
Network Interfaces24 x 10/100/1000Mbps RJ45 Ethernet ports
2 x 1Gbps SFP Ports
LED IndicatorsPower, Link, PoE
Performance
Switching Capacity52Gbps
Jumbo Frame Size16KByte
Forwarding Capacity38.7Mpps
ACL Table512
Forwarding ModeStore and forward
VLANs2, Packet Buffer Memory  4.1Mbit
RAM for CPU1Gbit
Flash Memory128Mbit
MAC Address Table8K
Power Method100 to 240VAC
50/60HZ
Power Consumption30W
Power Over Ethernet
PoE Ports24
PoE StandardIEEE802.3af
IEEE802.3at
PoE Power Budget430W
Max. PoE Wattage Per Port30W
PoE Voltage52V
PoE Pin AssignmentV- (RJ45 pin 1,2), V+ (RJ45 pin 3,6)
CasingMetal
TemperatureOperating:
0°C / 32°F to 40°C / 104°F
Storage:
-10°C  / 14°F to 75°C / 167°F
Operating Humidity:
5% to 95% non condensing
DimensionsHeight: 44mm /  1.73"
Width: 440mm / 17.32"
Depth: 200mm / 7.87"
InstallationRack mount or desktop
IncludedNetvio IP-SW-24P-10
UK and EU mains cables
Rack mount and screws
Four switch rubber feet
Videos:



Brand NameNetvio